Inconel 625 round bar is a nickel-chromium-molybdenum alloy that is supplemented by niobium. Niobium works to stiffen the alloy matrix, providing a high strength without the strengthening heat process. A wide range of intensely corrosive environments are protected by A625. It boasts of good durability and robustness. Stress-corrosion tracking resistance to chloride ions is one of its characteristics. Supreme Engineering Limited is a one among the leading Inconel 625 round bar suppliers and Inconel 625 round bar manufacturers in the country.
Inconel 625 round bars are oxidation and corrosion resistant materials that are a perfect fit for serving in extreme environments, depending on the heat and pressure. When being heated, round bars form a thick and stable oxide layer, protecting the surface from attack. They also retain strength over a huge temperature range, which proves to be attractive for high temperature applications.
The various forms of Inconel 625 round bar are covered by the following standards:
Applicable Standards | ASTM B446, AMS 5666 BS3076 |
---|---|
Carbon % | 0.10 Max |
Silicon % | 0.50 Max |
Manganese % | 0.50 Max |
Sulphur % | 0.015 Max. | Chromium % | 20-22 |
Molybdenum % | 8-10 |
Copper % | - |
Nickel % | 58 Min | Tungsten % | - |
Hardness (BHN) | 220 BHN |
Density | 8.44 |
U.T.S.(N/MM2) | 905 Mpa | Yeild Strength(Mpa) | 490 Mpa |
Elongation | 50% |
Reduction Area | |
Impact (Room Temperature) | |
Impact (0◦ C) | |
Impact (- __◦ C) |