Monel alloy 400 is a solid solution alloy that can be hardened by cold working. It proves to be strong and rugged over at high temperatures along with exceptional resistance to a lot of corrosive environments. Alloy 400 is utilised vastly in various fields, like marine and chemical processing. It is used in applications like marine fixtures and fasteners and crude petroleum stills. Supreme Engineering Limited can be approached if you're looking for Monel alloy 400 suppliers and Monel alloy 400 manufacturers.
It is also used in various other applications like valves and pumps, electrical and electronic components, gasoline and fresh water tanks, process vessels and piping, crude petroleum stills, heat exchangers and boiler feedwater heaters. Curie temperature is within the ambient range and is affected by variations in chemical composition. Some heats are magnetic at room temperature.
The various forms of Monel alloy 400 are covered by the following standards:
Applicable Standards | ASTM B164 QQ-N-281 Din 17750 |
---|---|
Carbon % | 0.3 Max |
Silicon % | 0.5 Max |
Manganese % | 2.0 Max |
Sulphur % | 0.024 Max | Chromium % | - |
Molybdenum % | - |
Copper % | 28.0-34.0 |
Nickel % | 63 | Tungsten % | - |
Hardness (BHN) | 120 BHN |
Density | 8.8 |
U.T.S.(N/MM2) | 480 Mpa | Yeild Strength(Mpa) | 170 Mpa |
Elongation | 35% |
Reduction Area | |
Impact (Room Temperature) | |
Impact (0◦ C) | |
Impact (- __◦ C) |